Configuring The Snmp Function - Tenda 11AC User Manual

8.2

Configuring the SNMP Function

Step 1 Choose SNMP and set SNMP Agent to Enable.
Step 2 Set related SNMP parameters.
Step 3 Click Save.
---End
Parameter description
Parameter
SNMP Agent
Administrator
Device Name
Location
Read Community
Read/Write Community
Description
It specifies whether to enable the SNMP agent function of the AP. By default, it is disabled.
An SNMP manager and the SNMP agent can communicate with each other only if their SNMP
versions are the same. Currently, the SNMP agent function of the AP supports SNMP V1 and SNMP
V2C.
It specifies the name of the administrator of the AP. The default name is Administrator. You can
change the name as required.
It specifies the device name of the AP. The default device name is the model of the AP.
It is recommended that you change the AP name so that you can easily identify the AP when
managing the AP using SNMP.
It specifies the location where the AP is used. The default location is ShenZhen. You can change the
location as required.
It specifies the read password shared between SNMP managers and this SNMP agent. The default
password is public.
The SNMP agent function of the AP allows an SNMP manager to use the password to read variables
in the MIB of the AP.
It specifies the read/write password shared between SNMP managers and this SNMP agent. The
default password is private.
81