Logs; Viewing Logs; Configuring Log Settings - Tenda 11AC User Manual

9.3

Logs

This module enables you to
9.3.1

Viewing Logs

The logs of the AP record various events that occur and the operations that users perform after the AP starts.
In case of a system fault, you can refer to the logs during troubleshooting.
To access the page, choose Tools > Logs.
To ensure that the logs are recorded correctly, verify the system time of the AP. You can correct the system
time of the AP by choosing Tools > Time & Date > System Time.
To view the latest logs of the AP, click Refresh. To clear the existing logs of the AP, click Clear.
When the AP reboots, the previous logs are lost.

The AP reboots when the AP is powered on after a power failure, the QVLAN function is configured, the firmware is

upgraded, an AP configuration is backed up or restored, or the factory settings are restored.
9.3.2

Configuring Log Settings

To access the page, choose Tools > Logs and click Log Settings.
On this page, you can set the number of logs to be displayed and configure log servers.
view logs and configure log settings.
89