Network Settings; Lan Setup - Tenda 11AC User Manual

6

Network Settings

6.1

LAN Setup

To access the page, choose Network Settings > LAN Setup.
This page enables you to view the MAC address of the LAN port of the AP and set the name, Ethernet Mode, IP
obtaining method, and other related parameters of the AP.
Parameter description
Parameter Description
It specifies the MAC address of the LAN port of the AP.
MAC Address
The default primary SSID of the AP is Tenda_XXXXXX, where XXXXXX indicates the last 6 characters of
this MAC address.
It specifies the IP address obtaining mode of the AP. The default option is Static IP Address.


IP Address Type
If Address Mode is set to DHCP, you can log in to the web UI of the AP only with the IP address
assigned to the AP by the DHCP server. The IP address is specified on the client list of the DHCP
Static IP Address: It indicates that the IP address, subnet mask, gateway, and DNS server
information of the AP is set manually.
DHCP: It indicates that the IP address, subnet mask, gateway, and DNS server information of the
AP is obtained from a DHCP server on your LAN.
26