Deploying The Ap With A Router Of Another Brand - Tenda 11AC User Manual

1. Start a web browser, enter the management IP address of the router to log in to the web UI of the
router, and configure the APs. For details about how to configure the AP on the router web UI, refer
to the user guide of the router. The user guide is available at http://www.Tenda.com.cn.
2.1.2

Deploying the AP with a Router of Another Brand

The following describes the procedure.
Step 1 Connect the devices.
1. Use an Ethernet cable to connect the computer to the PoE switch.
2. Connect one AP (such as AP1) to the PoE switch, as shown in the following topology.
address of the AP
Living room
Guest room
AP1
Step 2 Set the IP Address of Your Computer (Example: Windows 7).
1. Right-click the network icon in the lower-right corner of the desktop of the computer, and click Open
Network and Sharing Center, Local Area Connection, and then Properties.
to avoid IP address conflicts. Repeat this procedure to configure the other APs.
PoE switch
Bedroom
AP2
AP3
Router
LAN
PC (For AP configuration)
5
Change the IP
Internet
WAN