How To Configure Snmp Settings; How To Manage Your Device Via Telnet - Tenda I-WL-O3 User Manual

How to Configure SNMP Settings

The Simple Network Management Protocol (SNMP) is widely used in local area networks (LANs)
for collecting information, managing, and monitoring network devices, such as servers, printers,
hubs, switches, and routers. Specialized software in each SNMP capable device, known as an
Agent, continuously monitors the status of the device and reports the results to the SNMP
Manager software, which can then act on the report.

SNMP --- Disable/Enable the SNMP function.

Device Name --- Device name of the device.

Read Community --- Indicate the community string for read access to permit reading this
AP's SNMP information. The default is Public.

Read/Write Community --- Indicate the community string for write/read access to permit
reading and re-writing this AP's SNMP information. The default is Private.

Location --- Specify the physical location of the device.

How to Manage Your Device via Telnet

Telnet is another way to manage your device via cmd commands. Click Advanced > Network
Service and slide to the bottom of the current page to locate the Telnet section.
43
3 Advanced Settings