6.2
DHCP Server
6.2.1
Overview
The AP provides a DHCP server function to assign IP addresses to clients on the LAN. By default, the DHCP
server function is disabled.
If the new and original IP addresses of the LAN port belong to different network segment, the system
changes the IP address pool of the DHCP server function of the AP so that the IP address pool and the
new IP address of the LAN port belong to the same network segment.
6.2.2
Configuring the DHCP Server
Step 1
Choose Network Settings > DHCP Server.
Step 2
Set the parameters. Generally, you need to set only DHCP Server, Gateway Address, and Primary
DNS Server.
Step 3
Click Save.
*
*
---End
*
30