Snmp; Tools; Maintenance - Tenda WH450A User Manual

Table of Contents

Access Point

3. Fragment Threshold: Specify a valid Fragment Threshold value between 256-2346. The default

value is 2346. Any wireless packet exceeding the preset value will be divided into several fragments

before transmission.

4. RTS Threshold: Specify a valid RTS Threshold value between 1-2347. The default is 2347. If a

packet exceeds the preset value, RTS/CTS scheme will be used to reduce collisions. Set it to a smaller

value if there are distant clients and interference.

5. DTIM Interval: A DTIM (Delivery Traffic Indication Message) Interval is a countdown informing clients

of the next window for listening to broadcast and multicast messages. When such packets arrive at

device's buffer, the device will send DTIM (delivery traffic indication message) and DTIM interval to wake

clients up for receiving these packets. Specify a valid value between 1-255. The default is 1.

6. TX Power Percentage: Control TX power . Specify a value between 50 - 100. The default is 100.

3.6 SNMP

The Simple Network Management Protocol (SNMP) is widely used in local area networks (LANs) for

collecting information, managing, and monitoring network devices, such as servers, printers, hubs,

switches, and routers. Specialized software in each SNMP capable device, known as an Agent,

continuously monitors the status of the device and reports the results to the SNMP Manager software,

which can then act on the report. This device supports both SNMP v1 and SNMP v2.

Click Enable to enable the SNMP feature.

1. Get Community: Specify a community for reading SNMP agent information;

2. Set Community: Specify a community for writing SNMP agent information.

Upgrade

Upgrade is released periodically to improve the functionality of your device or to add new features. If you

run into a problem with a specific feature of the device, log on to our website (http://www.tendacn.com)

to download the latest firmware to update your device.

Click Tools > Maintenance > Upgrade to enter the screen below:

Table of Contents

W900a