7.2
Radio Settings
7.2.1
Overview
This module is used to set Radio parameters of the AP. The following briefly describes the SSID isolation
function.
SSID isolation
This function isolates the wireless clients connected to different wireless networks of the AP. For example, if
user 1 connects to the wireless network corresponding to SSID1, whereas user 2 connects to the wireless
network corresponding to SSID2, the two users cannot communicate with each other after SSID isolation is
implemented.
Disable SSID Isolation
SSID1
Devices connect to
SSID1 and SSID2
can communicate
with each other
7.2.2
Modifying Radio Settings
Step 1
Choose Wireless Setting > Radio Settings.
Step 2
Choose the radio band to be configured, which is 2.4 GHz Radio Band Settings in this example.
Step 3
Change the parameters as required. To change the Country/Region parameter, please unselect the
Channel Lockout at first.
Step 4
Click Save.
SSID2
Enable SSID Isolation
SSID1
Devices connect to
SSID1
and
cannot communicate
with each other
60
SSID2
SSID2