Optimizing Radio - Tenda 11AC User Manual

Disable Prioritize 5 GHz
2.4 GHz
Dual-band clients to
2.4 GHz
The prioritize 5 GHz function takes effect only on the condition that the wireless both of the 2.4 GHz
and 5 GHz are enabled, and the two bands share the same SSID, security mode and password.
 Air Interface Scheduling
In mixed wireless rates environment, the traditional FIFO (First-in First-out) allocates more air interface time to
clients with low transmission capacity and low spectrum efficiency, reducing the system throughput of each AP
then the system utilization.
The air interface scheduling function evenly allocates downlink transmission time to clients so that clients with
high transmission rate could transmit more data, improving the throughput of each AP and quantity of clients
allowed to be connected.
7.3.2

Optimizing Radio

You are recommended to retain the default settings if without the professional guidance.
Step 1 Choose Wireless Setting > Radio Optimization.
Step 2 Click the tab to choose the radio band to be configured.
Step 3 Change parameters as needed.
Step 4 Click Save.
5 GHz
Dual-band clients to 5
GHz
Enable Prioritize 5 GHz
2.4 GHz
Dual-band clients
to 2.4 GHz
* Assume that the max. number of clients allowed to
64
5 GHz
Dual-band clients to
5 GHz
connect to the 5 GHz is10.