Restoring The Factory Settings - Tenda 11AC User Manual

9.4.2

Restoring the Factory Settings

If you cannot locate a fault of the AP or forget the password of the web UI of the AP, you can reset the AP to
restore its factory settings and then configure it again.
 When the factory settings are restored, your configuration is lost. Therefore, you need to reconfigure the AP to
reconnect to the internet. Restore the factory settings of the AP only when necessary.
To prevent AP damages, ensure that the power supply of the AP is normal when the AP is reset.

After the factory settings are restored, the login IP address of the AP is changed to 192.168.0.254, and the user

name and password of the AP are changed to admin.
Method 1:
This method enables you to restore the factory settings without logging in to the web UI of the AP.
Procedure: After the AP is powered on, use a pin to hold down the reset button for 8 seconds and release it
until the green LED indicator turns solid on.
The AP is restored to factory settings when the green LED indicator (SYS indicator) blinks again.
Reset button
95