Dhcp Server - Tenda AP4 User Manual

5.3

DHCP server

5.3.1
Overview
The device provides a DHCP server function to assign IP addresses to clients on the LAN. By default,
the DHCP server function is disabled.
If the network segment of the device's LAN port changes, the network segment of the device's DHCP
server pool changes accordingly.
5.3.2
Configuring the DHCP server
Step 1 Choose Network > DHCP Server to enter the configuration page.
Step 2 Enable the DHCP server.
Step 3 Set the parameters. Generally, you only need to set Gateway Address and Primary DNS
Server.
Step 4 Click Save.
*
----End
If another DHCP server is available on your LAN, ensure that the IP address pool of the device does not
overlap with the IP address pool of that DHCP server. Otherwise, IP address conflicts may occur.
*
*
68