Dhcp Server - Tenda teg2124t User Manual

Wireless n300 wall plate access point
Hide thumbs Also See for teg2124t:
Table of Contents

Advertisement

Tip
1)
Default IP address and subnet mask are respectively 192.168.0.254 and
255.255.255.0.
2)
Be sure to make a note of any changes you apply to this page. If you change the LAN
IP address of this device, you have to update your PC's TCP/IP settings and open a
new connection to the new IP address and then log in again.

3 DHCP Server

This section includes the following:
3.1 DHCP
Server: Configure DHCP server settings.
3.2 DHCP Client
addresses from the DHCP server.
3.1 DHCP Server
DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on
11
List: View the information of the DHCP clients that currently obtain IP

Advertisement

Table of Contents
loading

Table of Contents