On this page, you can select wireless AP or Bridge to adapt different
wireless access environment.
3.3 Wireless Access Point (AP) Mode
Select "Wireless Access Point (AP)" and then click "Next" to enter the
basic settings.
Fill in the following items according to the reminder information.
1.
SSID: Set the SSID name of the device.
2.
Channel: Select the wireless communication channel. The default
is channel 6.
After you finish the settings, click "Next" to enter the "Security Settings"
page as the picture below:
Distribuidor
https://www.01seguridad.com.ar
Picture 4
7