Wireless Clients; Quick Setup; Ap Mode - Tenda teg2124t User Manual

300m wireless ap

Hide thumbs Also See for teg2124t:

Table of Contents

300M Wireless AP

3.2.4 Wireless Clients

Click Status > Wireless Clients to enter screen below. This section displays information of connected clients

(if any).

This device supports 3 working modes for expanding wireless network coverage. You can select one as you

need.

AP Mode: In this mode, the AP connects to the remote device via an Ethernet cable and then clients can

connect to the AP wirelessly, thus achieving the conversion between wired networks and wireless networks.

And without any configuration, you can achieve network sharing among multiple clients.

WDS Mode: In the WDS mode, the AP and the remote device should support WDS feature. By scanning

each other and keeping their SSIDs, channels, security modes and keys the same, they can bridge

successfully. Then clients can connect to the AP wirelessly for Internet access.

AP Client Mode: In this mode, what you need to do is to scan the remote device's signal and bridge it

successfully without any configuration on the remote device. Then clients can connect to the AP wirelessly

for Internet access.

Click Quick Setup to enter screen below:

Configuration Procedures:

1. SSID: This field is optional. You can change your SSID here if you want to;

Table of Contents