Installation - Modular Closets Corner Tall Hanging Unit Assembly And Installation Instructions Manual

ASSEMBLY AND INSTALLATION INSTRUCTIONS
CORNER TALL HANGING UNIT
10
10.1
Insert Camlocks (L) in holes in Set Shelves (E) and Upper and Lower Rear Hanging Cleats (F, G), with arrow
pointing toward Cam Post opening. Be sure Camlocks engage Cam Posts, and are fully seated in Shelves and
Cleats.
10.2
Tighten Camlocks (L) clockwise to lock.
11

INSTALLATION

11.1
Determine the mounting location for the
unit.
11.2
Using a stud finder, locate studs to which
the unit will be secured. Mark stud
locations with a pencil.
11.3
With the unit positioned at the desired
location, level the unit, then drill pilot
holes through Upper and Lower Rear
Hanging Cleats (F, G).
ARROW TOWARD
CAM POST OPENING
STANDARD
HEIGHT
84" FROM
FLOOR
L
E
E
-
L
L
L
G
G G
D
D
H H
PILOT HOLES
STUDS