Modular Closets Corner Tall Hanging Unit Assembly And Installation Instructions Manual page 4

ASSEMBLY AND INSTALLATION INSTRUCTIONS
CORNER TALL HANGING UNIT
4
L
4.1
Assemble Left Vertical Brace (C) onto Right Vertical Brace (D) by sliding Left Brace onto the Cam Posts (K) on
Right Brace. BE SURE dowel pins in Left Brace engage drilled holes in Right Brace, and Left Brace is pressed
flush against Right Brace.
4.2
Insert Camlocks (L) in holes in Left Vertical Brace (C), with arrow pointing toward Cam Post opening. Be sure
Camlocks engage Cam Posts, and are fully seated Left Brace. Tighten Camlocks (L) clockwise to lock.
5
G
L
5.1
Assemble Set Shelves(E), Upper Rear Hanging Cleat (F), and Lower Rear Hanging Cleat (G) onto assembled
Vertical Brace by sliding parts onto the Cam Posts (K) on Brace. BE SURE dowel pins in parts engage drilled holes
in Brace, and all parts are pressed flush against Brace.
5.2
Insert Camlocks (L) in holes in Set Shelves (E), Upper Rear Hanging Cleat (F), and Lower Rear Hanging Cleat (G),
with arrow pointing toward Cam Post opening. Be sure Camlocks engage Cam Posts, and are fully seated. Tighten
Camlocks (L) clockwise to lock.
L
C
K
D
F
E
L
L
K
K
K
K
K
E
L
ARROW TOWARD
CAM POST OPENING
ARROW TOWARD
CAM POST OPENING