Related Manuals for Modular Closets Cubby Insert 18"
Summary of Contents for Modular Closets Cubby Insert 18"
- Page 1 1-844-969-4247 support@modularclosets.com CUBBY INSERT 18" / 24" / 30" For use with Shelf Tower Unit or Cubby Unit ASSEMBLY AND INSTALLATION INSTRUCTIONS...
- Page 2 ASSEMBLY AND INSTALLATION INSTRUCTIONS CUBBY INSERT - 18" / 24" / 30" PARTS LIST TOOLS REQUIRED (purchased separately) Vertical Support (Qty 1) Shelf (Qty 4) Phillips Screwdriver Camlock (Qty 16) Cam Post (Qty 16) Lay parts out on a protective surface to prevent damage.
- Page 3 ASSEMBLY AND INSTALLATION INSTRUCTIONS CUBBY INSERT - 18" / 24" / 30" For installation in Cubby Unit or lower compartment of Shelf Tower Unit: Insert Vertical Support (A) into compartment in Unit. Make sure cutouts in Vertical Support engage Rear Cleats in Unit and front edge of Support is flush with front of Unit.
- Page 4 ASSEMBLY AND INSTALLATION INSTRUCTIONS CUBBY INSERT - 18" / 24" / 30" 4.1 For each Shelf (B), screw four Cam Posts (D) into pin holes in Unit side panels and Vertical Support (A) at the desired height until Posts are seated against Panels and Vertical Support.