Lamp Adjustment; Lock / Unlock The Moving-Head - Infinity iB-5R Manual

Infinity iB-5R

Lamp Adjustment

Using a screwdriver, turn the adjustment screw to adjust the lamp position. The lamp position is set in the
factory. As the lamps differ from manufacturer to manufacturer, it may be necessary to readjust their
position. The lamp must be readjusted if the light does not seem to be evenly distributed within the ray of
light. Ignite the lamp and focus the ray of light on an even surface (wall).

Lock / Unlock the Moving-head

You can lock the moving head by sliding the lock pin to the left (horizontally) for Pan or up (vertically) for
Tilt (Red arrows). You can unlock the moving head by sliding the lock pin to the right (horizontally) for Pan
or down (vertically) for Tilt (Green arrows).
Ordercode: 41530
10
Fig. 06
Fig. 07