Chassis Specifications - Cisco Network Convergence System 6000 Series Unpacking, Moving, And Securing Manual

Chassis Specifications

• Power components pallet: Contains the power components, including the Power Modules (PMs). For
• Primary card pallet: Contains the fabric cards, line cards, and route processor cards. The FCC pallet
• Cosmetics pallet: Contains the default cosmetic components for the exterior of the chassis. This pallet
Chassis Specifications
The following table lists the physical specifications (dimensions and weight) for the Cisco NCS 6000 Series
Routers (as shipped and as installed without packaging).
Table 2: Cisco NCS 6000 Series Chassis Specifications
Cisco NCS 6008 Line Card Chassis
Physical Dimensions (Without Packaging)
Height 81.0 in. (205.7 cm) as shipped
84.0 in. (213.4 cm) as installed with the "top cap"
(The top cap in the cosmetics package attaches to
the top of the chassis)
Width 23.6 in. (59.9 cm)
Depth 39.0 in. (99.1 cm) without doors and other cosmetics
42.0 in. (106.7 cm) with front and rear doors and
standard vertical cable troughs
Aisle Spacing To install the LCC (front): 48 in. (122 cm)
To service FRUs (front): 31.7 in. (80.5 cm)
To service FRUs (rear): 14.0 in. (35.6 cm)
Weight (Without Packaging)
775 lb (352 kg) chassis as shipped
1025 lb (466 kg) chassis in shipping crate with pallet
1450 lb (658 kg) chassis fully loaded with power,
fan trays, cards, and cosmetics
Cisco Network Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide
2
The drill hole template (Cisco product ID NC6-DRILLTEMP) is attached to the inside of the shipping
crate door. The drill hole template is the same for both the LCC and FCC.
the FCC, a separate box ships that contains a power supply enclosure that includes the power trays and
the PCMs.
contains only fabric cards.
will also contain any optional cosmetic components for the exterior of the chassis, if ordered.
Cisco NCS 6000 Fabric Card Chassis
76.60 in. (205.7 cm) as shipped
84.0 in. (213.4 cm) as installed with the power shelf
The FCC does not have a top cap.
23.6 in. (59.9 cm)
39.0 in. (99.1 cm) without exterior cosmetics
42.0 in. (106.7 cm) with front and rear doors and
standard vertical cable troughs
To install the FCC (front): 48 in. (122 cm)
To service FRUs (front): 31.7 in. (80.5 cm)
To service FRUs (rear): 14.0 in. (35.6 cm)
708 lb (321 kg) chassis as shipped
925 lb (420 kg) chassis in shipping crate with pallet
1130 lb (513 kg) chassis fully loaded with power,
fan trays, cards, and cosmetics
Overview