Appendix; Cisco Asr 14000 Series 8-Slot Line Card Chassis Specifications - Cisco ASR 14000 Series Installation Manual

Cisco ASR 14000 Series 8-Slot Line Card Chassis
Specifications
The following table lists the specifications for the Cisco ASR (Aggregation Services Router) 14000
series 8-slot line card chassis.
Table A-1
Supported Cards and Modules
Power Distribution Units
DC PDU
AC PDU
Maximum Power Consumption
Maximum DC
Maximum AC
DC Power Lug Torque Ranges
Minimum torque
Maximum torque
Power Redundancy
DC
OL-16973-01
Cisco ASR 14000 Series 8-Slot Line Card Chassis Component and Power
Specifications
8 modular services cards (MSCs
8 physical layer interface modules (PLIMs),
one for each MSC
4 switch fabric cards (SFCs)
2 route processors (RPs)
2 fan trays
1 air filter
2 AC or 2 DC power distribution units (PDUs)
(cannot mix AC and DC PDUs in the chassis)
Supports 1 DC power entry module (PEM)
Supports 1 AC rectifier module
This represents total input power.
8.0 kW
8.75 kW (Delta or Wye 3-phase)
Proper grounding is also required at the site to
Note
ensure that equipment is not damaged by
lightning or power surges.
20 in-lb (2.2 N-m)
30 in-lb (3.3 N-m)
2N (three "A" battery plant feeds for one PDU, and
three "B" battery plant feeds for the other PDU)
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
A P P E N D I X
A
A-1