Chapter 3 System Specifications; Chassis Specifications - Cisco 6000 Series Site Planning Manual

System Specifications
This appendix contains tables that list the specifications for the main components of the Cisco NCS 6008
chassis.
•
•
•
•

Chassis Specifications

Table 3-1
Supported Cards and Modules
Chassis Dimensions
Height
Width
Depth
Aisle spacing
Weights
OL-29236-02
Chassis Specifications, page 3-1
Power Specifications, page 3-2
Environmental Specifications, page 3-3
Regulatory, Compliance, and Safety Specifications, page 3-4
Cisco NCS 6008 Chassis Specifications
Cisco Network Convergence System 6000 Series Routers Site Planning Guide
C H A P T E R
Up to eight line cards
Six Fabric Cards
Two Route Processor cards
Two fan trays
81.0 in. (205.7 cm) as shipped
84.0 in. (213.4 cm) as installed with the top cap
(The top cap in the cosmetic package attaches to the top of the
chassis)
23.6 in. (59.9 cm)
35.3 in. (89.7 cm) as installed with optional AC PDU brackets on
each side of the chassis (Cisco PID PDU bracket: NCS-PDU=BRKT,
NCS-PDU-BRKT=spare)
39.0 in. (99.1 cm) without exterior cosmetics
42.0 in. (106.7 cm) with all exterior cosmetics
To install chassis (front): 48 in. (122 cm)
To service FRUs (front): 31.7 in. (80.5 cm)
To service FRUs (rear): 14.0 in. (35.6 cm)
3
3-1