Table of Contents
Advertisement
Product Description
The Ventrac MR740 reel mower is designed to be the ultimate trim and surround mower. The MR740 fea-
tures a 74" (188 cm) cutting width and variable speed hydraulics. The 3 reel heads are identical and easy
to change. Bypass valves enable/disable each reel motor individually.
Why Do I Need an Operator's Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely oper-
ate, maintain, and service your machine. It is divided into sections for convenient reference of the appropri-
ate section.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. Under-
standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
INTRODUCTION
V
enture Products Inc. is pleased to provide you with your new
Ventrac reel mower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Introduction - 5
Advertisement
Table of Contents
