Introduction; Product Description; Why Do I Need An Operator's Manual - Ventrac LQ450 Operator Manual And Parts Drawings

Accessories

Product Description

The Ventrac LQ450 field mower is designed for the sole purpose of mowing heavy grass and small brush.
Two counter-rotating blades discharge the cut grass to the center rear. Suspended front chains allow tall
grass to be cut more effectively and reduce the potential for front discharge. Three pins provide three cut-
ting height options: 2 1/4, 3 1/2, and 4 3/4 inches (5.7, 8.9, and 12.1 cm).
A single swivel tire is located on the front center frame of the mower. This position greatly reduces tree
branch interference. Skid shoes on both sides provide anti-scalping and blade protection.
The tree shield kit can be installed for use on tree farms, vineyards, nurseries, etc. This shielding protects
both the trees and the operator. Branch lifters and power unit tire covers are standard equipment with the
tree shield kit.

Why Do I Need an Operator's Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. Under-
standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.

INTRODUCTION

INTRODUCTION
V
enture Products Inc. is pleased to provide you with your new
Ventrac field mower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility as you use your LQ450. Please visit our web site, or
contact your authorized Ventrac dealer for a complete list of
items available for your new mower.
Item Description
LT Shield Kit For LQ450 (LT3000)
LE Shield Kit For LQ450 (LE3100 & LE3200)
LH Shield Kit For LQ450 (LH3400)
Introduction - 5
ber
Part Num
70.0108
70.3021
70.3047