Introduction; Product Description; Why Do I Need An Operator's Manual - Ventrac MT720 Operator's Manual & Parts Drawings

Accessories

Product Description

The MT720 mower is designed for the sole purpose of finish mowing and is built to be the best cutting and
longest lasting finish mower available. The high strength steel mower deck has an obstruction free grass
chamber to minimize buildup and provide easy cleaning. A rugged all steel reinforced carrier frame incorpo-
rates a full length rear roller for even cutting and grass striping.
The MT720 mower deck is offset 6-1/2" (16.5 cm) to the left side to aid in mowing along ditches, ponds,
and trimming around obstacles.
The MT720 features a 72 inch (183 cm) cutting width. Ventrac's Linear Adjustment System provides eigh-
teen cutting height positions from 1" (25 cm) to 5" (127 cm). A single hand adjustment lever allows for a
quick change in cutting height selection. A slide release allows the handle to be returned to deck level,
preventing it from catching on low branches and shrubs.
The deck can be tilted up to a near vertical position for cleaning, maintenance, or storage. An optional
hydraulic deck flip up kit uses the power unit hydraulic system to flip the deck up to the vertical position.

Why Do I Need an Operator's Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. Under-
standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.

INTRODUCTION

V
enture Products Inc. is pleased to provide you with your new
Ventrac MT720 mower! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility as you use your MT720. Please visit our website, or
contact your authorized Ventrac dealer for a complete list of
items available for your new MT720 mower.
Item Description
MS/MT720 Mulching Kit
(includes 79.0106 mulch blades)
Low Lift Blade (requires 3)
Gator Blade (requires 3)
Mulch Blade (requires 3)
Hydraulic Deck Flip Up Kit
Flat Free Tire/Wheel Assembly (requires 2 per mower)
Introduction - 5
ber
Part Num
70.8164
79.0104
79.0107
79.0106
70.8163
53.0148