MB Connect Line mbNET Series Quick Start Up Manual page 11

Label Status
LED off
Err
(Error)
LED on
WAN
LED green
lights
WAN-LED
LED flashing
orange
LAN 1 - 4
LED green
LAN-LED
lights
1- 4
LED flashing
(Dual LED)
orange
USB
Dial Out
Reset
COM1
COM2
Router working without errors.
Router error. Diagnostics under System Status
(see Status -
- Router WAN port. (customer network, DSL modem ...)
Network connection available.
Network data transfer active.
- Local network ports (e.g. machine network).
Network connection available.
Network data transfer active.
- Portable USB drive port.
- This button establishes an Internet or VPN connection.
- Pushing this button restarts the router (so-called cold start).
COM1 port for connecting to devices with RS232 / RS485,
-
RS422 interface�
COM2 port is for either connecting to devices with MPI interface
- or to devices with RS232 / RS485, RS422 interface. This de-
pends on your device type.
Description
System)�
- 11 -