Diagnostics; Factory Settings On Delivery - MB Connect Line mbNET MDH859 Quick Start Up Manual

10.2
In case of a failed connection setup,
the Diagnostic page supports for
trobleshooting. The respective result of
the individual, independent functions /
commands you need, inter alia in case
of support.

11 Factory settings on delivery

The mbNET is delivered with the following factory settings:
IP address
Subnet mask
Username
Password
You need the default password during the initial configuration and after each loading

Diagnostics

192.168.0.100
255.255.255.0
admin
The default password
is located on the
back of the device.
Keep the device default password in a safe place.
the factory settings.
Change unconditionally and without
delay the default login information!
NOTICE
- 25 -
ADVICE: