Access The Web Interface Of The Mbnet - MB Connect Line mbNET Series Quick Start Up Manual

Hide thumbs Also See for mbNET Series:
Table of Contents

Advertisement

8 Access the web interface of the mbNET

On the web interface of the mbNET a Status page and a Diagnostic page is available.
On the Status page, five steps with additional information are displayed, which must
be run through when connecting the mbNET with the portal.
The Diagnostic page helps you in case of a failed connection establishment in
trobleshooting.
Requirements:
• The configuration PC and the mbNET must be in the same IP address range.
Depending on the LAN IP that you assigned to the device in the portal, you may need to
assign the configuration PC to the same address range.
If you assigned the mbNET e.g. the LAN IP 192.168.2.200, you need the configuration
PC to assign the same address range (192.168.2.X). This applies to both the IP address
and subnet mask.
• The mbNET must be accessible via the LAN interface of the configuration PC.
Start a browser and enter the LAN IP you have assigned in the portal to the mbNET�
To log on to mbNET enter the following data:
Username: admin
Password: (no password needed)
- 22 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the mbNET Series and is the answer not in the manual?

Table of Contents