Safety Instructions - MB Connect Line mbNET Series Quick Start Up Manual

This Quick Start Guide provides a quick Overview of selected operating procedures and
functions of the mbNET industrial router (MDH800 – MDH859). However, the detailed
manual with the important Notes and safety instructions can NOT be replaced by this
document.
Read the following instructions carefully and keep them in a safe. Latest information, up-
dates and the complete Manual, visit our website at www.mbconnectline.com.

1 Safety instructions

• Only qualified specialist personnel may
install, start up, and operate the router. The
national safety and accident prevention
regulations must be observed.
• The router is built to the latest technological
standards and recognized safety standards
(see Declaration of Conformity).
• The router is only intended for operation in
the control cabinet and with SELV according
to IEC 60950/EN 60950/VDE 0805.
• The router may only be connected to
devices, which meet the requirements of
EN 60950.
• The router is for indoor use only.
• Never open the router chassis. Unauthori-
zed opening and improper repair can pose
a danger to the user. Unauthorized modifi-
cations are not covered by the manufactu-
rer's warranty.
Opening up the device voids the
warranty!
NOTE: elctrostatic discharge!
Observe the necessary safety
precautions when handling com-
ponents that are vulnerable
to electrostatic discharge (EN 61340-5-1
and IEC 61340-5-1)!
The mbNET routers are maintenance-free
units�
If a mbNET router have damage or mal-
function, the device must be immediately
taken out of service and secured against
inadvertent operation.
NOTICE:
The unit should be connected and operated
on a telephone switchboard only. The unit
is not intended to be direct connected to a
public telephone system.
- 3 -