10.2
In case of a failed connection setup,
the Diagnostic page supports for
trobleshooting. The respective result of
the individual, independent functions /
commands you need, inter alia in case
of support.
11 Factory settings on delivery
The mbNET is delivered with the following factory settings:
IP address
Subnet mask
Username
Password
You need the device password during the initial configuration and after each loading
Diagnostics
192.168.0.100
255.255.255.0
admin
The default password
is located on the
back of the device.
Keep the individual default password in a safe place.
the factory settings.
- 24 -
Change unconditionally and without
delay the default login information!
NOTICE
ADVICE: