Connection To The 230 V Mains Supply; Connection To The 115 V Mains Supply; Operation; Led Status Display - LEAB CHAMP 12 V User Manual

LEAB Automotive GmbH
NOTE! Connect the cable lug directly to the negative terminal of the battery.
5. Connect the vehicle battery to the vehicle power circuit.
ð The device is installed.

8.2 Connection to the 230 V mains supply

To connect the device to the 230 V mains, proceed as follows:
NOTE! The charger is only suitable for connection to fused, earthed 230 V
mains supplies.
1. Connect the mains plug to a 230 V mains supply.
ð The charger is connected to the 230 V mains supply.

8.3 Connection to the 115 V mains supply

To connect the device to the 115 V mains, proceed as follows:
NOTE! The charger is only suitable for connection to fused, earthed 115 V
mains supplies.
1. Connect the mains plug to a 115 V mains supply.
ð The charger is connected to the 115 V mains supply.

9 Operation

9.1 LED status display

LED display
LEAB Automotive GmbH
Item
Yellow LED lights up The charging process is in the I-
Yellow and green
LED lights up
Green LED lights up The charger is in the trickle char-
Thorshammer 6
Meaning
phase with maximum current. The
voltage drops as soon as the bat-
tery is charged.
The charger is in the main charging
phase. The battery is charged with
increased voltage.
ging phase. The charger ensures
that the battery remains charged.
24866 Busdorf
9 Operation
19