Removing The Display Panel; Prerequisites; Procedure - Alienware m17 P37E Service Manual

Removing the display panel

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover.
2 Remove the wireless
3 Remove the display assembly.
4 Remove the display bezel.

Procedure

NOTE: Ensure that the display assembly is placed on a clean and flat surface.
1 Remove the four screws (M2x3) that secure the display panel to the display back-cover and antenna assembly.
2 Gently lift the display panel and turn it over.
3 Peel the tape that secures the display-cable connector latch to the display panel.
4 Open the latch and disconnect the display cable from the display panel.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
card.
computer. After working inside your computer, follow the instructions
75