Removing the coin-cell battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is recommended
that you note the BIOS setup program's settings before removing the coin-cell battery.
Prerequisites
Remove the
base
cover.
Procedure
1
Disconnect the coin-cell battery from the system board.
2
Peel the tape that secures the coin-cell battery cable to the palm-rest assembly.
3
Peel the coin-cell battery off the palm-rest assembly.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
45