Removing the base cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Loosen the four captive screws on the base cover.
2
Remove the six screws (M2.5x9) that secure the base cover to the palm-rest assembly.
3
Remove the two screws (M2.5x9) from the back that secure the base cover to the palm-rest assembly.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
17