Screw List - Alienware m17 P37E Service Manual

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw
type is restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery (Half-length)
Battery (Full-length)
Hard-drive assembly
Fans
Heat-sink assembly
Wireless-card bracket
Solid-state drive bracket Palm-rest assembly
Solid-state drive
I/O board
Touchpad
Display hinges
Display hinges
Display panel
Secured to
Palm-rest assembly
Palm-rest assembly
Palm-rest assembly
Palm-rest assembly
Heat sink
System board and fan
System board
Solid-state drive bracket
Palm-rest assembly
Palm-rest assembly
Palm-rest assembly
Display back-cover and
antenna assembly
Display back-cover and
antenna assembly
Screw type Quantity
M2.5x9 8
M2x5 4
M2x5 6
M2x5 4
M2x3 2
M2x3 4
M2x3 1
M2x3 1
M2x2 1
M2x5 1
M2x2.5 4
M2.5x4.5 2
M2.5x4.5 10
M2x3 4
Screw image
15