Removing The Display Bezel; Prerequisites; Procedure - Alienware m17 P37E Service Manual

Removing the display bezel

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover.
2 Remove the wireless
3 Remove the display assembly.

Procedure

NOTE: Ensure that the display assembly is placed on a clean and flat surface.
1 Using a plastic scribe, unhook and release the sides of the display bezel from the display assembly as shown in the image in
the following order: Top (camera)->Left->Right->Bottom (Alienware logo).
NOTE: Note the location of each adhesive tape securing the display bezel to the display assembly (as shown in
yellow).
2 Lift the display bezel off the display assembly.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
card.
computer. After working inside your computer, follow the instructions
69