Sbus<N>:Nrz:source - Keysight Technologies InfiniiVision M9241A Scpi Programmer's Manual

27
:SBUS<n> Commands
:SBUS<n>:NRZ:SOURce
(see page 1368)
Command Syntax
:SBUS<n>:NRZ:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:NRZ:SOURce command selects the oscilloscope channel
connected to the NRZ signal
Query Syntax
:SBUS<n>:NRZ:SOURce?
The :SBUS<n>:NRZ:SOURce? query returns the selected oscilloscope channel
source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also • ":SBUS<n>:NRZ:BAUDrate" on page 862
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide 871