Search:serial:lin:pattern:data:length - Keysight Technologies InfiniiVision M9241A Scpi Programmer's Manual

:SEARch:SERial:LIN:PATTern:DATA:LENGth

Command Syntax
:SEARch:SERial:LIN:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SEARch:SERial:LIN:PATTern:DATA:LENGth command specifies the the length
of the data value when searching for LIN events.
The data value is specified using the :SEARch:SERial:LIN:PATTern:DATA command.
Query Syntax
:SEARch:SERial:LIN:PATTern:DATA:LENGth?
The :SEARch:SERial:LIN:PATTern:DATA:LENGth? query returns the current data
value length setting.
Return Format
<length><NL>
<length> ::= integer from 1 to 8 in NR1 format
See Also •
•
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
(see page 1368)
Chapter 28, ":SEARch Commands," starting on page 945
":SEARch:SERial:LIN:PATTern:DATA"
:SEARch Commands
on page 1002
28
1003