Keysight Technologies InfiniiVision M9241A Scpi Programmer's Manual page 1330

37
Status Reporting
If any of these bits are set, the OPER bit (bit 7) of the Status Byte Register is set.
The Operation Status Event Register is read and cleared with the
:OPERegister[:EVENt]? query. The register output is enabled or disabled using the
mask value supplied with the OPEE command.
See Also •
1330
":OPERegister[:EVENt] (Operation Status Event Register)"
Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
on page 232