maintenance
Bulb Replacement
1. T urn off power and gas to unit and allow to cool to room temperature.
2. R emove outer safety glass panels and inner panels (firebox glass)–see
instructions in this manual.
Light are located behind the front face of the unit
3. Loosen 2 screws on each side of individual inner light cover and remove.
4. Replace bulb and reverse steps to complete procedure.
NOTE: D o not handle bulb with bare hands. Use packaging or a tissue to hold
new bulb when replacing.
Regency Part# 911-208 Oven Lamp Assembly G9 120V/25W
Regency Part# 911-072 Replacement Bulb G9 120 Volt/25 watt
Inner light covers shown from back of unit (back made transparent)
| City Series CB72EPV
82
Inner Light Covers
Inner light covers close up
Inner light cover reassembly order