Inner Glass Panel Installation / Removal - Side Glass - Regency City CB72EPV-LP Owners & Installation Manual

Inner Glass Panel (Firebox Glass) Installation / Removal - Side Glass
1. Open 2x lower clamps by turning 90°.
2. Pull glass gasket pad forward to release glass.
Note: if gasket pad won't open--check that all clamps are turned a full 90°.
3. Open 2x top clamps by turning 90°.
4. G ently move bottom of side glass panel into the support channel as shown
in diagram below.
5. Tilt top of glass side panel outward to create clearance.
6. Remove panel.
7. Repeat steps to remove side glass panel on the opposite side.
8. Reverse steps to re-install side glass panels.
owner's information
City Series CB72EPV | 21