Base Use; Canopy Use - Maxi-Cosi Mico Max Plus User Manual

Base Use

21
Adjusting the Base
The base has multiple positions.
From the back of the base, squeeze
the base recline handle and lift or
lower front of base.
When installing the base, you may
have to adjust the base to achieve
the right recline angle.
The angle indicator will turn green
when correct angle is achieved.
Using the Load Leg
This car seat base has a load leg
with multiple length positions. It is
stored under the base.
This is an optional feature.
Please see the base vehicle install
sections on how to use it.
When not in use, the load leg must
be stored under the base.
WARNING:
Do not use the load leg on top of
vehicle storage compartments. Review your
vehicle owner's manual.

Canopy Use

Cleaning Canopy
Hand wash using warm sudsy water. Line dry.
Canopy Parts
MaxShade Canopy
(zips open for extended
coverage)
Canopy Hoop
(plastic strip)
Canopy Post
To Remove Canopy
Using a screwdriver, press in
on canopy tab locks on canopy
post and pull the canopy hoop
off the posts. Pull canopy hoop
out of canopy.
continued on next page
22