Removing And Installing Child Restraint To Base - Maxi-Cosi Mico Max Plus User Manual

19
9
Attach 2nd Harness Strap
Loops to Splitter Plate
As Shown
Sewn ends of the harness strap
loops must face towards you.
Do not twist harness strap or
harness adjustment strap.
Make sure the same harness
strap loops are fi tted
completely on both sides of
the splitter plate.
sewn
end
WARNINGS:
Make sure harness height is
correct for your child's size.
Harness system must be installed correctly.
Failure to follow these steps can result in serious
injury or death.
Removing and Installing
Child Restraint to Base
To Remove Child
Restraint from Base
From the back of the child
restraint, slide the base release
handle up and lift the child
restraint out of the base.
To Attach Child
Restraint to Base
Align the slots on the side of child
restraint with the lock bars in the
base.
Push down firmly on the carry
handle and front of the child
restraint to lock it to the base.
You will hear a "click" when it is
locked.
Pull up on front two corners of
child restraint by infant's feet
to make sure it is locked to the
base.
20