Preparing Car Seat For Child Fit - Maxi-Cosi Mico Max Plus User Manual

Preparing Car Seat
7
for Child Fit
1 Remove Child Restraint
From Base
From the back of the child
restraint, slide the base release
handle up and lift the restraint
out of the base.
2
Fully Loosen Harness
Straps
Push down on harness release
lever (through opening in pad)
while pulling out on harness
straps as shown.
3
Unbuckle Harness
Press in on the red button.
Buckle
Tongue
Pull buckle tongues out.
4
Release Chest Clip
Hold each side of the chest clip
and press on the release button
with your thumb and pull apart.
Release Button
5 Place Child in Car Seat
to Determine Proper
Harness Fit
The child's bottom and back
should be fl at against the
car seat.
Body Pillow
You must use the body pillow
for children who weigh 4-5 lb
(1.8-2.3 kg).
You may remove the infant
insert for bigger infants.
For Rear-Facing child fi t, see page 9.
8