Adjusting The Base; Carrier Use - Maxi-Cosi Mico Max 30 Instructions Manual

Removing and Installing Child Restraint
to Base
19
To Remove Child
Restraint from Base
From the back of the child
restraint, slide the base
release handle up and lift the
child restraint out of the base.
To Attach Child
Restraint to Base
Align the slots on the side of
child restraint with the lock
bars in the base.
Push down firmly on the carry
handle and front of the child
restraint to lock it to the base.
You will hear a "click" when it
is locked.
Pull up on front two corners of
child restraint by infant's feet
to make sure it is locked to the
base.

Adjusting the Base

To Adjust the Base
The base has multiple
positions.
From the back of the
base, pull out on the base
recline handle and lift or
lower front of base.

Carrier Use

To Adjust Carry Handle
Squeeze both
adjustment buttons on
each side of the carry
handle. Rotate up or
down to desired location.
Release buttons.
Make sure both carry handle adjuster buttons are
in the locked position.
When carrying, the handle
When installed in the vehicle, the handle can
be in any locked position.
MUST be upright.
continued on next page
20