Maxi-Cosi Mico Max Plus User Manual page 20

33
3
The AutoLock
When used correctly, this car
seat base's AutoLock will lock
the vehicle belt.
Please go to the vehicle belt
installation with base section
of the manual to see how to
properly use this feature.
Base Vehicle Belt Install: page 39.
If you do not use this feature, you must lock the vehicle
belt using the retractor or the latch plate; continue to
step 4 .
4
Check the Retractor
Retractors pull seat belts into
stored positions and lock the
belt to hold passengers in place.
See the next page for some
common types of vehicle belt
retractors that will work with this
child restraint.
Types of Retractors
Switchable Retractor
(most vehicles have this type)
This retractor can be switched to a locking mode.
You must have the retractor in the locking mode to
use the seat belt with this child restraint.
Switching to locking mode: Slowly pull the shoulder belt
all the way out, then let it go back in an inch or two.
As it goes back in, you will most likely hear a ratcheting
sound.
Gently pull the belt to see if it has locked. You will not be
able to pull any more belt out if the lock has engaged.
Automatic Locking Retractor
This retractor always locks.
It will automatically lock after slowly pulling the seat belt
out at least halfway and letting the belt go back into the
retractor an inch or two.
continued on next page
34