Program Location 02 (Pl02) - ADC Gas Electric Steam AD-26 User Manual

E. PROGRAM LOCATION 02 (PL02)
Percent dry from 90 to 100%
Dryness level decrease
("Hold In" to Accelerate)
Summary: The percentage of dryness is programmable from a minimum of 90% to a maximum of 100%.
Refer to Section V for instructions
on entering program locations.
Perm Press
(Wait 3-Seconds)
LO Temp
Perm Press
Proceed to
next location
to be changed
PL02
Location to be viewed/changed.
Display reads "PdrY" percent of dryness
and the actual numeric value programmed
(90-100%). If no change, press "Perm
Press" key, otherwise press the "HI" or
"LO" keys and then "Perm Press" key.
Pdry
Dryness level Increase
100 HI Temp
("Hold In" to Accelerate)
PL03
To exit
program
mode open
or
program
switch
36