Table of Contents
Advertisement
Adjusting the interior fittings (refrigerator section)
Moving the adjustable shelves
Stops prevent the shelves from being
dislodged by mistake.
The shelves can be adjusted accord-
ing to the height of the food.
1. Lift the shelf up slightly at the front.
2. Pull it forward a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upward to pre-
vent food from touching the back of
the appliance and freezing to it.
38
Adjusting the bottle rack
The bottle rack can be placed at differ-
ent positions in the appliance.
Lift the bottle rack slightly at the front,
pull it forward a little, lift the recess
over the shelf supports, and move the
shelf up or down.
The stop bar at the back must face up-
ward to prevent the bottles from touch-
ing the back wall.
Stops prevent the bottle rack from be-
ing dislodged by mistake.
Advertisement
Table of Contents
