Creating The Modbus System; Modbus System Creation Procedure - Siemens NK8237 MP4.40 Installation, Function & Configuration, Commissioning

Configuration
7.4

Creating the Modbus system

7.4.1

Modbus system creation procedure

36
Building Technologies
Fire Safety & Security Products
This configuration task is performed in Composer on a project created for the
NK8237 gateway starting from an empty template.
The creation of the Modbus system is the first step of the NK8237 configuration.
Failing to create the Modbus system at the very beginning prevents you from
configuring the fire system and the rest of the project.
Adding the folder for the Modbus system
1. Select the main node of the project.
2. In the toolbar on the left, click the Generic Template icon
A new folder is added to the project structure.
By default, the new node is named "Generic Node #1".
3. Rename the folder node and enter e.g. "Modbus System".
Adding the Modbus Master station
1. Select the Modbus system folder.
2. In the toolbar on the left, select the Modbus Master icon
A new node is added to the project structure.
By default, the new node is named "Modbus Master #1".
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
.
.
06.2011