Siemens NK8237 MP4.40 Installation, Function & Configuration, Commissioning page 62

Maintenance and diagnostics
62
Building Technologies
Fire Safety & Security Products
Read DLL Version
Reads all subsystems configured. Displays a dialog box with a list of configured
subsystems organised by name, number, and creation date.
Read Kernel Version
Reads the version of the Linux kernel installed on NK823x.
Read NK Version
Reads the version of the installed NK82xx firmware (NK82xx.EXE).
Read NK Date Time
Reads current settings of date and time from the NK82xx RTC.
Read CPU ID
Reads the CPU ID from the DIMM-PC module on NK822x.
Read Product ID
Reads the Product ID from the NK82xx. The Product ID is used to distinguish be-
tween NK8222, NK8223, and NK8225.
Read HW Conf. ID
Reads the HW Configuration ID from the NK82xx. The HW Conf. ID is used to
check the HW Configuration from a remote location:
 Serial:
 LON:
 Serial + LON:
Read Memory
Displays the amount of RAM (in bytes) available on the NK82xx.
Read Connected IP
Reads the IP address of the last host PC that was connected to the selected port.
It can be useful to find out the IP address of the host computers connected.
Pressing this button causes the following dialog box to display:
Fig. 40 Port number request
A possible port number to check is 502 (Modbus). Click OK to confirm.
At that point, the associated field shows the type of information found (e.g. Last IP
connected) and you can to use the field arrow controls to show the actual IP ad-
dress.
Note: If the IP address shows '0.0.0.0', no PC was connected to that port.
NH8002 (NK822x) or NKA8001-A1 (NK823x) serial port
add-on board installed
NH8010 PC-104 LON add-on board installed (NK822x)
NH8002 + NH8010 installed (NK822x)
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
06.2011