Software Installation; Nk8237 Composer Tools; Distribution Package - Siemens NK8237 MP4.40 Installation, Function & Configuration, Commissioning

6

Software Installation

6.1

NK8237 Composer Tools

6.1.1

Distribution package

Building Technologies
Fire Safety & Security Products
NK8237 software installation includes the following:
 Composer and basic tools for system configuration, included in one of the
DMS8000 product setup
 Refer to the MM8000 Installation, Configuration & Commissioning guide
(document no. A6V10062413)
 NK8237 add-on, as described in 6.1 below
 Additional tools: NW8202 and NW8204, as described in 6.2 and 6.3 below.
The NK8237 tools are distributed as an add-on package for DMS8000, to be in-
stalled on the engineering station after the standard Composer tool installation.
Installation kit
The installation kit includes (Fig. 17):
 The new Help files, describing the Modbus configuration procedures.
 The new Composer Subsystem Tool (New ST) for the Modbus models.
 The NK82xx firmware, i.e. an additional DLL module(s) supporting the Modbus
protocol.
 The extension name text file; e.g.: MM8000 – Extension Product Name.
Fig. 17 Installation kit
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Software Installation
23
06.2011